The Tyrant (Darth Malgus inspired)

The Tyrant!
Inspired by the Infamous Darth Malgus' Saber from the Old Republic Era. This single sided hilt is 5 main parts with two blades coming in at 14.17 inches (360mm) with out the blades and 18.5 inches (470mm) overall. All of the parts work off the same threading system as all of our other hilts! (All Parts for this hilt are available in the build your own section)

-1 Emitter (T-1)
-1 Top Extension (Comes with Main body and 2 attachable blades) (T-2a) 2x(T-2b)
-1 Switch Section (T-3)
-1 Bottom Extension (T-4)
-1 Pommel (T-5)
-Stand sold separately

Every switch section comes with a fake button (12mm) for one of the two holes should you want to install a light only set up. (other additional fake buttons available for $2 a piece)

In addition every hilt has brass threaded heat-set inserts in order to provide durability to the threads, and will come with set screws to secure your light and blade.

The inner diameter is made to fit any 1" blade, and widens from the switch section down to accept most standard electronics with the inner diameter widening to 29mm. These hilts are meant for cosplay and display, not dueling as they are 3-D printed parts.